Description

The LIFESAFETY POWER FPO250-B100C8D8E2 is a 250-watt access control power supply designed to deliver regulated 12-volt and 24-volt DC output across 16 lock outputs and 16 auxiliary outputs. It is built for use in commercial access control infrastructure where reliable, distributed power is required for electric strikes, magnetic locks, readers, and ancillary devices. Licensed electricians and low-voltage access control technicians typically specify and install this unit as a centralized power source in multi-door systems. The E2 designation indicates an integrated, network-capable power management module for remote monitoring and diagnostics.

This power supply is suited for commercial and light-industrial access control installations where a high output count and dual-voltage capability reduce the need for additional power distribution hardware. Typical applications include office buildings, secured facilities, and campuses where multiple controlled entry points are served from a single power enclosure. The 16 lock outputs and 16 auxiliary outputs allow simultaneous powering of locking hardware and peripheral devices such as door position switches, request-to-exit sensors, and card readers.

Key Features

250-watt total output capacity supports demanding multi-door access control loads
Dual-voltage output: selectable or simultaneous 12-volt and 24-volt DC
16 individually protected lock output circuits
16 auxiliary output circuits for readers, sensors, and peripheral devices
E2 network power management module enables remote monitoring and event logging
Centralized enclosure design simplifies installation and service access

Compatibility

Designed as an OEM-style power supply for commercial access control systems requiring dual-voltage distributed power with a high output channel count.

Installation Notes

Installation should be performed by a licensed electrician or qualified low-voltage technician in accordance with NEC Article 725 and applicable local codes. Disconnect and de-energize all power sources before wiring lock outputs or auxiliary circuits. Verify load calculations prior to installation to ensure total connected load does not exceed the 250-watt rating. Follow the manufacturer wiring diagram for E2 network module termination to ensure proper supervisory communication.