Description
Constructed of an aluminium center section and cast iron end plates, model GP-F20 is a high-pressure hydraulic gear pump with 11 displacement sizes from 0.24 – 1.95 in3/rev. (4 – 32 cm3/rev).
The standard mounting flange is a SAE A – 2 bolt. Standard drive shaft is a 5/8” straight shaft with 5/32” key. Additional shaft options are available as outlined in the Ordering Example.
Recommended working conditions:
- FILTRATION: 25 micron or better
- OIL VISCOSITY: 7 – 700 cSt
- INLET PRESSURE: 12 – 32 psi absolute
- OIL TEMP: -25° – 80°C (-12° – 175°F)
- AMBIENT: -22° – 55°C (-8° – 130°F)
