Description

The HILLMAN FASTENERS 42604 is a gray ceramic-coated exterior screw designed for outdoor fastening applications where corrosion resistance is critical. Each screw measures 2 inches in length, size 8, with a sharp point Phillips drive and coarse thread pattern. The Fasntite gray ceramic coating delivers a 1,000-hour salt spray rating and is backed by a 10-year corrosion resistance claim. This screw is suited for deck construction, exterior trim, fencing, and other exposed wood fastening tasks. Licensed contractors, carpenters, and experienced DIYers working on exterior projects will find the sharp point eliminates the need for pre-drilling in most softwood applications.

These screws are intended for exterior wood-to-wood fastening in residential and light commercial construction. The coarse thread pattern provides strong pull-through resistance in dimensional lumber, engineered wood, and composite substrates. The gray ceramic coating blends with pressure-treated lumber and weathered wood surfaces, making it a common choice for deck boards, railing systems, and fence pickets exposed to moisture and UV. Each package contains 50 screws, sized for single-job quantities or supplemental stock.

Key Features

Gray ceramic coating with 1,000-hour salt spray resistance rating
10-year corrosion resistance claim for exterior exposure
Sharp point tip for direct drive into softwood without pre-drilling
Phillips drive, coarse thread pattern for high pull-through strength
2 inches x size 8 dimensions suited to standard exterior trim and decking thickness
50-piece pack quantity for focused task use

Compatibility

Designed as an OEM-style exterior wood screw for use in standard wood-to-wood fastening applications involving dimensional lumber, pressure-treated wood, and common exterior composite substrates.

Installation Notes

Installation is typically performed by carpenters, general contractors, or experienced DIYers using a Phillips bit driver or drill-driver set to appropriate torque to avoid stripping the head. Pilot holes are recommended when fastening near board edges or in hardwood to prevent splitting. When working with pressure-treated lumber, verify that the ceramic coating is rated compatible with the preservative chemistry used in the treated material. Follow local building codes for fastener spacing and embedment depth on structural exterior applications.