Description

The PANDUIT FZ2ERLNSNSNM021 is an OM4 multimode duplex fiber optic patch cord designed for high-density structured cabling environments. Built with a 1.6mm diameter cable jacket and LC duplex connectors on both ends, this cord supports high-bandwidth data transmission over OM4-grade 50-micron multimode fiber. The OFNR (Optical Fiber Nonconductive Riser) rating makes it suitable for in-building riser installations where fire code compliance is required. Network installers and low-voltage technicians working in data centers, enterprise networks, and telecommunications rooms are the primary users of this type of patch cord.

This patch cord is appropriate for use in riser-rated structured cabling installations connecting active equipment, patch panels, and fiber distribution units. OM4 fiber supports 40 Gigabit and 100 Gigabit Ethernet applications over appropriate distances. The LC duplex form factor is widely used in high-density switch and router installations where space at the port is limited. This cord is sold as a single unit and is suited for both new installations and equipment moves, adds, and changes in commercial and enterprise environments.

Key Features

OM4 multimode fiber supports 40GbE and 100GbE applications
LC duplex connectors on both ends for high-density port environments
1.6mm slim cable diameter for improved airflow and cable management in dense installations
OFNR-rated jacket meets riser fire code requirements for in-building vertical runs
2-fiber duplex construction for bidirectional transmission
Sold individually as a single patch cord unit

Compatibility

Designed as an OEM-style replacement and standard patch cord for OM4 multimode fiber infrastructure using LC duplex port equipment in riser-rated environments.

Installation Notes

Installation is typically performed by low-voltage technicians or network cabling professionals. Inspect connector end-faces for contamination and clean with an appropriate fiber optic cleaning tool before insertion. Avoid bending the cable beyond the minimum bend radius to prevent signal loss or physical damage to the fiber. Riser installations must comply with applicable local building and fire codes governing optical fiber cable routing.