Description
No longer available.
Ametek – (Ametek/Rotron) 1PHASE 2HP 115/230VCommercial Air Blowers. 2HP, 50/60 Cycle, 115/230 Volts, 85 lbs. is part number 037935 and replaces DR505AW58M.
2 HP, 115/230v, 1 Phase, Commercial Air Blower. Nema rated blower amps -17.6a/8.8a (115v/230v). Max blower amps 26a/13a.
Note that the newer blowers are now Ametek (Ametek/Rotron). Save by ordering this Ametek model 037935.
| Brand | Ametek |
| Item | Regenerative Blower |
| VoltageRating | 115/230 V |
| Phase | 1 |
| FrequencyRating | 50/60 Hz |
| HPRating | 2 hp |
| MaximumBlowerAmps | 26/13 A |
| BlowerType | Regenerative |
| InletSize | 2 Inch |
| OutletSize | 2 Inch |
| InsulationClass | F |
| ServiceFactor | 1.2 |
| ThermalProtection | Class B |
| Construction | Cast Aluminum Blower Housing, Impeller and Cover, Cast Iron Flanges |
| DirectionofCurve | Forward |
| BearingType | Ball |
| Dimension | 365.3 mm x 343.7 mm x 381 mm |
Also designed for continuous-running operation in health clubs, condominiums, hotels, motels. Features: Low noise level, Built-in silencers, Direct drive (no belts), Totally enclosed, fan-cooled motors, Cast Aluminum Housing, Perma-Lube sealed ball bearings, Built-in thermal protection, Continuous non-pulsating oil free airflow,
Designed for Commercial Spa Agitation. This heavy guy weighs about 90 lbs.
Product Features
- Manufactured in the USA – ISO 9001 and NAFTA compliant
- Cast Aluminum blower housing, impeller and cover, Cast iron flanges (Threaded)
- Inlet & outlet internal mu!ing
- UL and CSA approved motor with permanently sealed ball bearings
- Quiet operation within OSHA standards
Special order item – please allow 2-3 weeks for delivery. Contact us for current lead time/production time.
See the pdf here.
Manufacturer Notes:
Rotron motors are designed to handle a broad range of world voltages and power supply variations. Our dual voltage 1 phase motors are factory tested and certified to operate on both: 104-115/208-230 VAC-1 ph-60 Hz and 100-110 /200-220 VAC-1 ph-50 Hz. All voltages above can handle a ±10% voltage fluctuation. Special wound motors can be ordered for voltages outside our certified range.Maximum operating temperature: Motor winding temperature (winding rise plus ambient) should not exceed 140°C for Class F rated motorsor 120°C for Class B rated motors. Blower outlet air temperature should not exceed 140°C (air temperature rise plus inlet temperature).Performance curve maximum pressure and suction points are based on a 40°C inlet and ambient temperature. Consult factory for inlet or ambient temperatures above 40°C.Maximum blower amps corresponds to the performance point at which the motor or blower temperature rise with a 40°C inlet and/or ambient temperature reaches the maximum operating temperature.Note: The blowers should not be stopped/started more than four times an hour.
DR505AW58M
