Description
Chlor 62 this brand of Chlorine Sanitizer and Shock 47239975 2 Lb can only be shipped to Iowa Illinois or Wisconsin. See Leisure Time Spa 56 2lb chlorine granules 22337A or Natural Chemistry Chlorine Concentrate 04111.
Use 47233031 for 2lb container of spa chlorine.
Or See Spa Choice: 47233031 Sanitizing Chlorine Crystals.
note chemicals cannot be shipped outside the contiguous USA.
Granular chlorine sanitizer for hot tub spa water. Now shipping this item as part 47239975 and ONLY FOR Iowa, Illinois or Wisconsin.
Otherwise, see the Spa Choice version of Chlorine granules:Spa Choice granular chlorine
If you order this item anyways and are outside these states you will receive the equivalent 2lb. Spa Choice granular chlorine version. Both products are comparable. We cannot ship spa chemicals outside of the continental U.S.A.
Specially formulated granular chlorine disinfects and sanitizes hot water and is specifically for use in spas and hot tubs. After your spa has been filled, add 1 level tablespoon of chlorine to supershock the water and to establish a chlorine residual. Allow the spa to circulate until a chlorine reading of 1-3 ppm is attained; do not use your spa until the level has been reached.
Chlorine for hot tubs.
At this time, test the water again to ensure that the pH is between 7.4 – 7.8. If pH is below 7.4 add pH Up and if it s above 7.8 add pH Down.
Need a whole Chlorine based starter kit? Hot Tub Outpost offers a set including chlorine, pH Up and Down, First Step, Refresh, Sparkle, Test Strips and more.
ACTIVE INGREDIENT:Sodium Dichloro-s-TriazinetrioneDihydrate……………………………………………………………….99%OTHER INGREDIENTS…………………………………………1%Total……………………………………………………………………100%Available Chlorine……………………………55.5%
DIRECTIONS FOR USE:
METHOD OF APPLICATION:
Broadcast the product evenly over a wide area in the deepest part of the pool or spa withwater circulating.
SPA AND HOT TUB USE:
Each level teaspoon (0.17 oz.) of this product will provide approximately 1.4 ppm availablechlorine in 500 gallons of water. Using an appropriate test kit, test and adjust the water to the following values: pH 7.2-7.8,total alkalinity 60-100 ppm, calcium hardness 200 ppm minimum. Maintain these conditions for proper spa and hot tuboperation by frequent testing with a test kit. Do not allow cyanuric acid level to exceed 150 ppm. It is recommended thatspas and hot tubs be drained every 30-90 days. More often under heavy use. Consult manufacturer’s recommendationsconcerning the compatibility of chlorine sanitizers with their equipment. Some oils, lotions, fragrances and cleaners maycause foaming or cloudy water and may react with chlorine sanitizers to reduce their efficacy.
START-UP (FRESHLY FILLED)1. Turn on the circulation system and ensure that it is operating properly.2. Add 6 teaspoons of this product for each 500 gallons of water.Check the free available chlorine (FAC) and, if below 4-5 ppm, repeat as needed. Re-entry into treated spas is prohibitedabove levels of 3 ppm of chlorine.REGULAR USE:Turn on the circulation system and ensure that it is operating properly. Scatter approximately 3 teaspoons per 500 gallonsof this product over the surface of water. Always use a clean, dry spoon. Test for FAC and add additional product, ifnecessary, to attain 4-5 ppm FAC. Maintain 1-3 ppm FAC while the spa or hot tub is in use. After each use, shock treat with9 teaspoons per 500 gallons water to control odors and algae. Repeat as needed. Re-entry into treated spas is prohibitedabove levels of 3 ppm of chlorine.
