Description

The PANDUIT FW2ERLNLNSNM007 is a 2-fiber OM5 duplex fiber optic patch cord designed for structured cabling installations in data centers, enterprise networks, and high-density fiber environments. Terminated with LC duplex connectors on both ends, it features a 1.6mm diameter jacketed cable construction with a physical contact (PC) polish finish on the ferrules. The OFNR (Optical Fiber Nonconductive Riser) rating qualifies this cord for riser-rated plenum spaces where fire code compliance is required. This patch cord is the type of component installed by low-voltage cabling technicians and network infrastructure specialists.

This patch cord is suited for use in multimode OM5 fiber runs supporting wideband multimode fiber (WBMMF) applications, including short-reach parallel and bidirectional transmission systems. It is appropriate for use in commercial and enterprise environments where LC duplex connections are standard, including switch-to-patch-panel links, server connections, and cross-connect applications. Installation typically occurs inside equipment rooms, telecommunications rooms, or riser pathways.

Key Features

OM5 multimode fiber supports wideband multimode applications and legacy OM4 backward compatibility
LC duplex connectors on both ends for high-density panel and transceiver compatibility
PC polish ferrule finish reduces back reflection and insertion loss at the connection point
1.6mm jacket diameter suited for high-density patching environments with tight bend radius management
OFNR riser rating meets fire code requirements for installation in vertical cable runs between floors
2-fiber duplex construction supports full-duplex transmission in a single cord

Compatibility

Designed as an OEM-style patch cord for use with LC duplex-compatible fiber optic panels, transceivers, and switches in OM5 multimode structured cabling systems.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician familiar with fiber optic handling practices. Always inspect and clean LC ferrules before mating to avoid contamination-related signal loss. Do not exceed the minimum bend radius of the cable during routing, and avoid sharp kinks or physical stress on the jacket. Riser installations must comply with applicable local fire and building codes governing optical fiber cable routing.