Description

The Leviton R10-DSL01-0LM is a Decora-style rocker dimmer with an integrated slide bar, designed for controlling LED, CFL, and incandescent lighting loads up to 150 watts. The rocker paddle provides on/off switching while the slide bar allows smooth, precise dimming adjustment. This dimmer is suited for single-pole and 3-way switching configurations, making it a versatile choice for residential lighting control. Licensed electricians and knowledgeable installers handle this type of device as part of standard interior wiring projects. The white finish and Decora rocker profile align with the most common decorator-style wallplate systems.

This dimmer is appropriate for residential lighting circuits where the load consists of dimmable LED, CFL, or incandescent bulbs rated within the 150W maximum. It fits single-pole applications where one switch controls a fixture, and also supports 3-way installations where two switches control the same fixture from separate locations. The package quantity is 3 units, making it practical for multi-room or multi-switch projects. It is well suited for living rooms, bedrooms, hallways, and similar interior spaces requiring adjustable light levels.

Key Features

Compatible with LED, CFL, and incandescent bulb types up to 150W
Integrated slide bar for smooth dimming control alongside rocker paddle switching
Supports both single-pole and 3-way wiring configurations
Decora rocker profile fits standard Decora-style wallplates
White finish for a clean, neutral appearance in residential settings
Packaged in a quantity of 3 units per package

Compatibility

Designed as an OEM-style replacement or new-installation dimmer for residential lighting circuits using dimmable LED, CFL, or incandescent fixtures in single-pole or 3-way configurations.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Always shut off the circuit breaker controlling the circuit before beginning any wiring work and verify the circuit is de-energized with a non-contact voltage tester before touching any conductors. For 3-way installations, a compatible 3-way dimmer or switch is required at the second location. Do not install on circuits with motor loads, fluorescent fixtures not rated for dimming, or loads exceeding the 150W rating.