Description
The Hayward Face Plate (SPX1084L) is the OEM replacement faceplate for Hayward Auto-Skim skimmers used in vinyl and fiberglass pool installations.
This faceplate mounts at the pool wall opening where the skimmer meets the liner, providing a finished, watertight seal between the skimmer throat and the pool interior.
Specifications
| Hayward Part Number | SPX1084L |
| UPC | 610377037143 |
| Outer Dimensions | 10-3/4″ W x 8-9/16″ H |
| Inner Dimensions | 7-5/8″ x 5-5/8″ Opening |
Fits Into
| Brand | Equipment Line | Model / Part Number | Notes |
| Hayward | 2″ FIP Auto-Skim Square Skimmer for Vinyl/Fiberglass – White | SP1084 | |
| Hayward | 1″ FIP Auto-Skim Square Skimmer for Vinyl/Fiberglass – White | SP10841 | |
| Hayward | 1″ FIP Auto-Skim Square Skimmer for Vinyl/Fiberglass – White (incl Outside Mount) | SP10841OM | |
| Hayward | 1″ FIP Auto-Skim Square Skimmer for Vinyl/Fiberglass – Dark Gray (incl Outside Mount) | SP10841OMDGR | Dark Gray finish |
| Hayward | 1″ FIP Auto-Skim Round Skimmer for Vinyl/Fiberglass – Dark Gray (incl Outside Mount) | SP10841OMRDGR | Dark Gray finish; round skimmer variant |
| Hayward | 1″ FIP Auto-Skim Square Skimmer for Vinyl/Fiberglass – White (incl Main Drain & Accessory Pack) | SP10841OMTE | |
| Hayward | 1″ FIP Auto-Skim Round Skimmer for Vinyl/Fiberglass – White | SP10841R | Round skimmer variant |
| Hayward | 2″ FIP Auto-Skim Square Skimmer for Vinyl/Fiberglass – Dark Gray | SP1084DGR | Dark Gray finish |
| Hayward | 2″ SKT Auto-Skim Skimmer for Concrete with Square Lid – White, NSF-50 (incl Float) | WG1084SFVE | Concrete installation; NSF-50 rated |
Compatibility is based on Hayward parts documentation and available OEM records. This is not an exhaustive list. For certainty, verify the part number in your equipment’s manual or on the original part itself before ordering.
Poolaroo Pro Tip
When replacing the faceplate on a vinyl or fiberglass pool, inspect the liner cut-out edge and the skimmer gasket at the same time. A worn or compressed gasket behind the faceplate is the most common source of seepage at this joint. Replace the gasket if it shows any flattening or cracking the faceplate and gasket are typically serviced together to avoid pulling the wall fitting twice.
