Description

VIQUA TAP Series Ultraviolet Disinfection Systems are specifically designed for point-of-use applications where microbiological control is required. Ultraviolet water treatment controls bacteria, virus and protozoan cyst (specifically giardia lamblia and cryptosporidium). VIQUA TAP series are installed at a single tap (or faucet) within a home, cottage or business. TAP systems are also suitable for fountains or low-flow applications (1-4 gpm).

Benefits of UV disinfection

99.99% destruction of bacteria, virus & protozoan cysts (Giardia Lamblia & Cryptosporidium) at rated flow.
Chemical-free
Easy to install and service
Economical and energy efficient

VIQUA TAP Series VT1 replaces Sterilight Copper Series SC1, which is now obsolete by the manufacturer.

Specifications for VIQUA VT1


AMI Part Number:	VT1
Recommended Flow Rate*:	1 GPM (4 LPM)
Voltage:	N. America (NEMA P-15)
Power Consumption:	13W
Connection:	1/2″ MNPT 3/8″ FNPT Combo
Chamber Dimensions:	2.5″ Dia. x 12.5″L
Lamp Life:	9,000 Hours
Lamp Cord:	Approximately 5 feet
Max. Operating Pressure:	125 psi (8.62 bar)
Ambient Temperature:	36-104F (2-40C)

*Factory recommended flow rate is calculated at a UV dose of 30 mj/cm. See manufacturer’s specification sheet for flow rates at different doses.

What Size of UV
System Do I Need?

Choose a UV System with a recommended flow that meets or exceeds your fixture’s flow rate. When in doubt, always choose the next size up.

Don’t know your flow rate?

Visit our Flow Rate & Sizing Guidefor help.

Replacement Parts for VIQUA VT1


S212RL	UV Lamp Only for VIQUA VT1
QS-212	UV Quartz Sleeve Only for VIQUA VT1
BA-VT	Controller Kit for VIQUA Tap Series
410867	Lamp O-Ring for VIQUA UV
RN-001	Retaining Nut for VIQUA UV
4109958-R	2.5″ Mounting Brackets for VIQUA UV
270276-R	Lamp Connector Base for VIQUA UV
SP008	Lamp Connector Spring for VIQUA UV