Description

The DEWALT ACCESSORIES DW1910 is a 5/32-inch split point drill bit designed for fast, accurate hole drilling in wood, metal, and plastic. The Pilot Point tip starts on contact with the workpiece, eliminating the walking and wandering common with standard bit designs. A No-Spin Shank locks securely into the chuck to prevent slipping during operation. The tapered web construction adds structural strength to resist bit breakage under load. Size markings are positioned above the shank where wear is minimal, keeping identification readable over the life of the bit. This bit is suited for general-purpose trade and maintenance drilling tasks.

The DW1910 is a general-purpose bit appropriate for residential and light commercial applications. It handles wood framing and finish work, metal fabrication and sheet stock, and plastic conduit or fixtures. Packaged in a quantity of 5 per unit, it is a practical stock item for HVAC, electrical, and plumbing technicians who need reliable drill bits on hand for a variety of field tasks. The 5/32-inch diameter is a common size for pilot holes and through-holes in light-gauge materials.

Key Features

Pilot Point tip starts on contact for clean, accurate holes without center-punching
No-Spin Shank prevents bit rotation inside the chuck during use
Split point geometry reduces lock-up and grabbing on material breakthrough
Tapered web design increases durability and resistance to breakage
Size markings located above the shank to prevent wear-off over time
Suitable for drilling in wood, metal, and plastic

Compatibility

Designed as a general-purpose replacement or stock split point drill bit compatible with standard 3-jaw keyed and keyless drill chucks accepting 5/32-inch round shanks.

Installation Notes

Installation is performed by electricians, plumbers, HVAC technicians, and general trade professionals using standard corded or cordless drills. Secure the No-Spin Shank firmly in the chuck before operation to ensure full engagement. When drilling metal, use appropriate cutting fluid or lubricant to extend bit life and reduce heat buildup. Wear appropriate eye protection and ensure the workpiece is properly secured before drilling.