Description

The Leviton R54-0CSB3-2TS is a commercial-grade 3-way toggle switch rated for 20 amps at 120 to 277 volts AC. It is designed for use in lighting control circuits where two switches must control a single fixture or group of fixtures from separate locations. Both back-wired and side-wired termination options are available, giving installers flexibility to suit the wiring method required by the job. Finished in light almond, this switch is built to commercial specifications for durability in demanding environments. Licensed electricians typically install this device as part of a standard lighting branch circuit in commercial, institutional, or high-demand residential applications.

This switch fits standard single-gang wall boxes and is suited for commercial office buildings, schools, warehouses, retail spaces, and similar facilities where 277-volt lighting circuits are common. The 3-way configuration allows control of a lighting load from two separate switching points, a standard requirement in corridors, stairwells, and open floor plans. Each package contains 10 units, making it practical for multi-location installations or contractor stocking.

Key Features

20A rating supports commercial lighting branch circuits at both 120V and 277V AC
3-way switching allows independent control from two locations
Back and side wired terminations accommodate different wiring methods
Light almond finish for consistent appearance in commercial interiors
Commercial-grade construction for high-cycle durability
Package quantity of 10 units for efficient contractor purchasing

Compatibility

Designed as an OEM-style commercial replacement or new-installation 3-way switch for standard single-gang wiring devices in 120V and 277V lighting control circuits.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the circuit at the breaker panel and verify zero voltage with a meter before making any connections. Both back-wire and side-screw terminations are available on this device; do not use both methods simultaneously on the same terminal. Confirm the traveler wires are correctly identified before terminating to avoid miswired 3-way circuit faults.