Description

The CUSTOM BLDG PRODUCTS PBPG38210 is a polymer-modified, cement-based non-sanded grout formulated for highly glazed or polished tile, marble, and natural stone surfaces where sanded grout would cause scratching. Sold in a 10-pound unit in Bone color, this grout meets ANSI A118.6 standards and delivers non-shrinking performance with consistent finished color. It accommodates joint widths up to 1/8 inches and is engineered for both interior and exterior installations. Tile setters and flooring contractors rely on it for demanding applications where surface finish integrity and color uniformity are critical.

PBPG38210 is suited for a wide range of interior and exterior installations including floors, countertops, walls, ceilings, showers, fountains, and pools. Its non-sanded formula makes it the correct choice for delicate stone and polished tile surfaces that would be marred by abrasive grout particles. The polymer modification improves adhesion, color consistency, and overall durability compared to standard cement-based grouts, making it a reliable option for both residential and light commercial tile work.

Key Features

ANSI A118.6 certified polymer-modified, cement-based non-sanded grout
Non-shrinking formula maintains joint integrity over time
Suitable for joint widths up to 1/8 inches
Safe for highly glazed tile, polished stone, and marble that sanded grout would scratch
Approved for interior and exterior use including wet areas such as showers, fountains, and pools
Enhanced color consistency for uniform finished appearance across large installations

Compatibility

Designed for use with highly glazed or polished tile, marble, and natural stone in grouted joints up to 1/8 inches wide on floors, walls, countertops, ceilings, showers, fountains, and pools in interior or exterior settings.

Installation Notes

Installation is typically performed by a licensed tile setter or flooring contractor following ANSI and Tile Council of North America guidelines. Mix grout to a smooth, lump-free consistency and allow tile adhesive to fully cure before grouting. For wet areas such as showers and pools, ensure waterproofing membranes are in place prior to grouting. Clean excess grout from tile surfaces promptly before it hardens to protect the finished tile face.