Description

The Charlotte Pipe Foundry Co. PVC 00104 0500HA is a 1-1/4 inch DWV Schedule 40 female trap adapter designed to connect drain trap assemblies to hub-style DWV pipe systems. The fitting uses a hub x slip configuration, accepting a standard tailpiece on the slip end for a secure, leak-resistant connection. Constructed from Schedule 40 PVC, it delivers the wall thickness and pressure rating required for drain, waste, and vent applications. Licensed plumbers install this fitting during fixture rough-in and service work on sinks, lavatories, and similar drain applications.

This adapter is suited for residential and light commercial DWV installations where a trap tailpiece must connect to a hub-end PVC drain line. It is commonly used beneath sinks, lavatories, and wet bars during new construction or remodel work. The hub end solvent-welds to Schedule 40 PVC pipe, while the slip end accepts a standard 1-1/4 inch trap tailpiece. This item is sold in a package quantity of 50, making it practical for plumbing contractors stocking inventory for multiple fixture installations.

Key Features

Hub x slip configuration accepts a standard 1-1/4 inch trap tailpiece on the slip end
Schedule 40 PVC construction meets DWV wall thickness requirements
Hub end solvent-welds to Schedule 40 PVC DWV pipe for a permanent, leak-resistant joint
Sized at 1-1/4 inches for compatibility with standard lavatory and sink drain applications
Sold in a 50-unit package, suitable for contractor-level stocking quantities

Compatibility

Designed as an OEM-style replacement and new-installation fitting for Schedule 40 PVC DWV piping systems requiring a 1-1/4 inch female trap adapter at the hub connection point.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Before beginning work, shut off water supply to the fixture and ensure the drain line is clear. The hub end requires a compatible PVC solvent cement and primer applied per manufacturer instructions before joining to Schedule 40 pipe. Do not overtighten slip-joint nuts on the tailpiece end, as PVC fittings can crack under excessive mechanical force.