Description

The ANDERSON METALS CORP 710069-0402 is a 1/4 inch compression by 1/8 inch male pipe thread (MPT) elbow fitting designed for use in plumbing and fluid-handling systems. This 90-degree transition fitting connects a 1/4 inch compression tube to a 1/8 inch MPT threaded port, making it a common choice when routing small-diameter tubing to a threaded inlet or valve body. The fitting is lead free compliant and meets the requirements of Public Law 111-380, making it suitable for potable water applications where lead-free materials are required by code. Licensed plumbers and pipefitters are the primary installers of this type of fitting.

This elbow is well-suited for residential and light commercial plumbing systems where a directional change is needed between a compression tube line and a threaded pipe connection. Typical applications include water supply lines, refrigeration tubing connections, ice maker supply feeds, and similar small-bore fluid systems. The carded packaging includes a package quantity of 10 pieces, making it practical for service trucks and supply inventory. The elbow is sold per each (EA) unit.

Key Features

1/4 inch compression inlet by 1/8 inch male pipe thread outlet configuration
Lead free compliant, meets Public Law 111-380 requirements for potable water use
90-degree elbow geometry for directional changes in tight spaces
Carded packaging, 10 pieces per package for easy inventory and field use
Suitable for small-bore water supply and fluid-handling applications

Compatibility

Designed as an OEM-style replacement or service fitting for systems using 1/4 inch compression tubing with 1/8 inch male pipe thread port connections in residential and light commercial plumbing installations.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and relieve line pressure before removing or installing any compression fitting. Hand-tighten the compression nut onto the tube, then use an appropriate wrench to snug the fitting do not overtighten, as this can deform the compression ferrule and cause leaks. Apply thread sealant or PTFE tape to the male pipe threads before making up the threaded connection.