Description

Product Overview

The Jandy R0851600 is a genuine OEM replacement fan shroud kit designed for compatible Jandy VS FloPro pumps equipped with a DV2A variable-speed motor.

The fan shroud mounts over the rear motor fan area and helps protect the cooling fan while directing airflow around the motor. Proper airflow is important for maintaining motor cooling and reliable pump operation.

This replacement kit includes the fan shroud and four mounting screws. It is intended for replacing a cracked, missing, damaged, or deteriorated motor fan cover.

Compatible Pump Models

The R0851600 fan shroud kit is compatible with select Jandy VS FloPro DV2A variable-speed pumps, including:

Jandy VSFHP185DV2A
Jandy VSFHP185DV2AS
Jandy VSFHP270DV2A
Jandy VSFHP270DV2AS

Compatible motor sizes include:

1.85 HP DV2A motors
2.7 HP DV2A motors

Confirm the complete pump model number and motor configuration before ordering.

Key Features

Genuine Jandy OEM replacement part
Designed for compatible Jandy DV2A motors
Fits select 1.85 HP and 2.7 HP VS FloPro pumps
Protects the rear motor cooling fan
Helps direct cooling airflow around the motor
Replaces a cracked, broken, or missing fan shroud
Includes four mounting screws
Designed to match the original factory installation
Simple replacement during professional pump service

Specifications

Specification	Details
Brand	Jandy
Manufacturer	Fluidra
Product Type	Motor Fan Shroud Replacement Kit
Manufacturer Part Number	R0851600
SKU	R0851600
Compatible Pump Series	Jandy VS FloPro DV2A
Compatible Motor Sizes	1.85 HP and 2.7 HP
Compatible Models	VSFHP185DV2A, VSFHP185DV2AS, VSFHP270DV2A and VSFHP270DV2AS
Fan Shroud Included	Yes
Mounting Screws Included	Yes, Four
Motor Included	No
Variable-Speed Drive Included	No
Cooling Fan Included	No
Pump Wet End Included	No
Barcode / UPC	Not Provided
Condition	New
Installation	Professional Installation Recommended

What Is Included

One Jandy DV2A motor fan shroud
Four fan-shroud mounting screws

Only the components specifically listed above are included.

Items Not Included

This replacement kit does not include:

Pump motor
Variable-speed drive
Motor cooling fan
Drive cover
Wiring compartment cover
RS485 access cover
Pump housing
Backplate
Impeller
Diffuser
Shaft seal
Electrical wiring
Communication cable
Installation labor

Fan Shroud Function

The fan shroud covers the cooling-fan area at the rear of the motor. It helps protect the fan from accidental contact and assists with directing airflow around the motor housing.

A damaged or missing fan shroud may expose the cooling fan to:

Physical impact
Leaves and debris
Small animals or insects
Loose wiring
Accidental contact during servicing
Reduced or disrupted airflow

The pump should not be operated with loose components near the motor fan.

When to Replace the Fan Shroud

Replacement may be necessary when the existing shroud has:

Cracks or broken sections
Missing mounting tabs
Stripped screw locations
Impact damage
Heat damage
UV deterioration
Excessive vibration
Missing mounting screws
Contact with the cooling fan

Inspect the cooling fan and motor housing before installing the replacement shroud.

Compatibility Information

The R0851600 fan shroud is designed for compatible Jandy pumps using the DV2A motor platform.

Before ordering, confirm:

Complete pump model number
Motor horsepower
DV2A motor designation
Existing fan-shroud shape
Mounting-screw locations
Pump production configuration

Do not select this part based only on the Jandy brand or variable-speed designation. Older Jandy pumps and pumps using different motor platforms may require another fan cover.

Installation Recommendations

Installation should be completed with the pump electrically disconnected.

Recommended installation steps:

Turn off power at the circuit breaker.
Lock out the electrical supply when possible.
Confirm that the motor and cooling fan have stopped completely.
Remove the damaged fan shroud and mounting screws.
Inspect the cooling fan for cracks or damage.
Remove any leaves or debris from the motor ventilation area.
Position the replacement shroud over the fan.
Install the four supplied mounting screws.
Tighten the screws evenly without overtightening.
Confirm the fan rotates freely without contacting the shroud.
Restore power and inspect the pump for abnormal noise or vibration.

Never reach into the fan area while electrical power is connected.

Confirm Before Ordering

Please confirm all of the following before purchasing:

Your pump uses a Jandy DV2A variable-speed motor
Your pump model is compatible with R0851600
Your pump uses a 1.85 HP or 2.7 HP VS FloPro motor
The existing fan shroud matches the replacement design
The cooling fan itself is not damaged
The motor does not have additional damage requiring replacement

Warranty Information

Manufacturer warranty coverage is subject to Jandys current written warranty terms, product eligibility, proof of purchase, purchase channel, and installation requirements.

Warranty coverage generally applies to qualifying manufacturing defects and does not cover damage caused by: