Description

The FALCON 25REO6284 is a 4-foot rim exit device finished in aluminum, designed for single-door egress applications in commercial and institutional buildings. Rim exit devices mount directly to the door surface and release the latch with a push bar, providing compliant panic hardware for occupant egress. This unit is sold as a device-only configuration, meaning it ships without trim or outside access hardware. Licensed door hardware specialists and commercial locksmiths are the typical installing trades. The aluminum finish provides a clean, neutral appearance suited to hollow metal or aluminum-framed doors in high-traffic corridors, stairwells, and exit passages.

The 25REO6284 is intended for standard 4-foot single doors in commercial occupancies requiring panic or fire exit hardware. Typical installations include office buildings, schools, healthcare facilities, and light industrial spaces where code-compliant egress hardware is required at exit doors. The device-only format allows pairing with a separately sourced outside trim or lever handle, giving installers flexibility in specifying access control on the secure side. No specific model compatibility is stated by the manufacturer for this listing.

Key Features

Rim-mount configuration installs directly to door face without through-bolt mortise cutout
4-foot push bar spans the door width for compliant single-door egress
Aluminum finish suitable for aluminum-framed and hollow metal door applications
Device-only configuration allows independent specification of outside trim hardware
Sold individually as a single exit device unit

Compatibility

Designed as an OEM-style rim exit device for standard commercial single doors with a nominal 4-foot width. No specific compatible door families or replacement part numbers were identified in the product data.

Installation Notes

Installation should be performed by a licensed door hardware technician or commercial locksmith familiar with applicable building and fire codes, including IBC and NFPA 101 egress requirements. Verify door preparation and strike alignment before securing the device to the door face. Confirm that the installed configuration meets the authority having jurisdiction requirements for the occupancy type before final acceptance.