Description

The TRANSITION NETWORKS SBFTF1013-105-OZ is a standalone media converter that bridges 10/100BASE-TX copper Ethernet and 100BASE-FX fiber optic networks using a 1×9 optical transceiver module with an SC fiber connector interface. This unit handles the physical-layer signal conversion required when extending network segments beyond the distance limits of copper cabling or when interconnecting copper-based switches and endpoints with fiber backbone infrastructure. It is typically installed by network technicians and low-voltage cabling professionals in enterprise, commercial, and industrial environments where fiber-to-copper conversion is needed at the edge or in the wiring closet.

This media converter is suited for enterprise network deployments where 100BASE-FX fiber runs must terminate into copper-based 10/100 Ethernet equipment. Typical installation scenarios include connecting copper-wired workstations or switches to a fiber uplink, extending network reach across buildings, or integrating legacy copper segments into a fiber infrastructure. The SC connector interface is widely used in structured cabling systems, making this unit compatible with standard SC-terminated fiber patch cables in both single-mode and multimode configurations depending on the installed 1×9 transceiver.

Key Features

Converts between 10/100BASE-TX copper and 100BASE-FX fiber optic media
SC fiber connector interface for compatibility with standard structured cabling
1×9 optical transceiver socket for field-selectable fiber type
Supports enterprise network environments per RCAT classification
Single-unit (EA) packaging for individual deployment or spare stocking

Compatibility

Designed as an OEM-style media converter for enterprise network environments requiring 10/100BASE-TX copper to 100BASE-FX fiber conversion with an SC connector interface.

Installation Notes

Installation is performed by qualified low-voltage or network cabling technicians in accordance with applicable TIA/EIA structured cabling standards and local codes. Power down or disconnect the network segment before connecting or disconnecting fiber patch cables to avoid potential optical hazard and link disruption. Handle SC fiber connectors carefully and keep dust caps in place until the moment of connection. Verify that the installed 1×9 transceiver matches the fiber type and wavelength of the connected fiber run before bringing the link up.