Description
Pentek DGD 2501 Dual Gradient 10″ 4″, 50/5 Micron Sediment Filter
Pentek Dual Gradient 104 50/5 Micron Sediment Filter
DGD Series cartridges are manufactured from 100% pure polypropylene and are sized for use in our Big Blue filter housings.
The DGD-2501 is a dual gradient density filter that features both a pre-filter and post-filter. The pre-filter has a 25-micron rating while the inner layer has a 1-micron rating which allows for utmost filtration efficiency. The polypropylene construction removes silt, dirt, rust, and lime-scale particles. SKU155359-43
This Pentek DGD-2501 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has 2 separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 psi at a flow rate of 10 GPM and operates over a temperature range of 40 to 145F (4.4 to 62.8C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance and is used for the treatment of residential, commercial, and municipal drinking water.
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines 2 separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 GPM
- Temperature range of 40F to 145F (4.4C to 62.8C)
