Description
Product Overview
The Aladdin GO-KIT79V is a premium Viton pump seal and O-ring repair kit engineered for compatible Sta-Rite Max-E-Pro pool pumps. Designed as a complete rebuild kit, it includes the essential seals, O-rings, and gaskets commonly replaced during pump maintenance, helping restore leak-free operation and extend pump life.
Unlike standard Buna-N seal kits, the GO-KIT79V features Viton elastomers, which provide superior resistance to heat, ozone, saltwater, chlorine, and harsh pool chemicals. This makes the kit an excellent choice for pools equipped with salt chlorine generators, ozone systems, or commercial applications where seals are exposed to more demanding operating conditions.
Aladdin’s GO-KIT series eliminates the guesswork of sourcing individual replacement parts by packaging the most commonly replaced sealing components into one convenient kit. Whether replacing a leaking shaft seal, worn diffuser O-ring, or deteriorated lid gasket, the GO-KIT79V provides the components needed for a professional-quality pump rebuild.
This kit is specifically designed for compatible Sta-Rite Max-E-Pro pool pumps. Pump model compatibility should always be verified before ordering.
Key Features
- Genuine Aladdin GO-KIT79V repair kit
- Designed for Sta-Rite Max-E-Pro pool pumps
- Premium Viton shaft seal and O-rings
- Excellent chemical and heat resistance
- Ideal for saltwater and ozone pool systems
- Complete pump seal rebuild kit
- Helps eliminate pump leaks
- Restores sealing performance
- High-quality OEM-style replacement components
- Convenient all-in-one repair package
- Suitable for residential and commercial pools
- Professional-grade construction
Benefits
Replacing worn pump seals before they fail helps prevent water leaks that can damage pump motors, bearings, and surrounding equipment. The GO-KIT79V allows technicians and homeowners to rebuild the pump using premium Viton sealing materials designed to withstand more aggressive pool environments than standard rubber seals.
Viton components resist swelling, hardening, and deterioration caused by chlorine, salt, ozone, and elevated operating temperatures. This helps provide longer service life in demanding applications while reducing the likelihood of premature seal failure.
Using a complete repair kit also helps ensure that all major sealing surfaces are serviced at the same time, reducing the need to disassemble the pump again to replace overlooked components.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Aladdin Equipment Company |
| Product Name | Viton Pump Seal Kit |
| Manufacturer Part Number | GO-KIT79V |
| SKU | GO-KIT79V |
| Product Type | Pump Seal & O-Ring Repair Kit |
| Pump Compatibility | Sta-Rite Max-E-Pro Pumps |
| Seal Material | Premium Viton |
| Chemical Resistance | Chlorine, Salt, Ozone |
| Application | Pump Rebuild & Seal Replacement |
| Pool Type | Residential & Commercial |
| Saltwater Compatible | Yes |
| Individual Components | Multiple O-Rings, Gaskets & Shaft Seal |
| UPC / Barcode | 0600377805290* |
Kit Includes
The GO-KIT79V contains the primary sealing components required for a Max-E-Pro pump rebuild, including:
- Premium Viton mechanical shaft seal
- Pump lid O-ring
- Diffuser O-ring
- Housing and seal plate O-rings
- Drain plug O-rings
- Silicone lubricant packet
Kit contents may vary slightly depending on production revision but are intended to service compatible Sta-Rite Max-E-Pro pumps.
Installation Information
Disconnect electrical power before servicing the pump. Close all suction and return valves and relieve system pressure before disassembly.
Remove the motor assembly and replace all seals and O-rings included in the kit. Clean all sealing surfaces thoroughly before installing the new components. Apply a thin coat of pool-approved silicone lubricant to the O-rings only. Do not lubricate the sealing faces of the mechanical shaft seal.
Professional installation is recommended to ensure proper seal alignment and leak-free operation.
Confirm Before Ordering
Please verify:
- Your pump is a compatible Sta-Rite Max-E-Pro model.
- You require GO-KIT79V.
- You prefer Viton seals for saltwater or ozone systems.
- You are rebuilding the pump rather than replacing individual seals.
- Your pump model and production date match the kit compatibility.
- You have the proper tools for pump disassembly and reassembly.
Warranty Information
The Aladdin GO-KIT79V is covered by the manufacturer’s limited warranty against defects in materials and workmanship. Warranty does not cover improper installation, chemical abuse, incorrect application, physical damage, or normal wear of sealing components.
Customer Q&A
What is the difference between GO-KIT79 and GO-KIT79V?
The GO-KIT79V uses premium Viton seals, offering greater resistance to saltwater, ozone, chemicals, and heat than the standard GO-KIT79.
Is this recommended for saltwater pools?
Yes. Viton seals are specifically recommended for saltwater chlorine generator systems because of their superior chemical resistance.
Does this include the mechanical shaft seal?
Yes. The kit includes a premium Viton mechanical shaft seal along with the required O-rings and gaskets.
Will this fit every Sta-Rite pump?
No. It is designed specifically for compatible Sta-Rite Max-E-Pro pumps. Always verify your pump model before ordering.
