Description
The DEWALT ACCESSORIES DW1906 is a 2-pack of 3/32-inch split point drill bits designed for clean, accurate hole drilling in wood, metal, and plastic. The pilot point tip starts on contact, eliminating the need for a center punch and reducing bit walking on smooth or curved surfaces. A no-spin shank locks firmly into the chuck to prevent slipping during high-torque applications. The tapered web construction adds core strength, reducing the risk of breakage under load. Size markings are located above the shank, where wear is minimal, so the bit size stays legible throughout the tool’s service life.
These bits are suited for general-purpose drilling tasks encountered by electricians, plumbers, HVAC technicians, and other trade professionals who work across mixed materials on the job site. The 3/32-inch diameter is commonly used for pilot holes, sheet metal penetrations, and light-duty fastener clearance holes. The split point geometry reduces the axial thrust needed to start the cut, which is useful when drilling thin-gauge material where exit burrs and blowout are concerns. Each pack contains two bits, providing an immediate backup on the job.
Key Features
- Pilot point tip starts on contact for accurate hole placement without wandering
- No-spin shank prevents bit rotation inside the chuck under load
- Tapered web design increases durability and resistance to breakage
- Reduces lock-up on breakthrough for cleaner exit holes
- Size markings located above the shank to resist wear
- Compatible with wood, metal, and plastic drilling applications
Compatibility
Designed as a general-purpose replacement or backup drill bit for standard 3/32-inch chuck applications in cordless and corded drills used across electrical, plumbing, HVAC, and general construction trades.
Installation Notes
Install the bit fully into the chuck and tighten securely before operation to engage the no-spin shank feature. Always wear appropriate eye protection when drilling metal or plastic. When drilling metal, use a cutting lubricant where applicable to extend bit life and reduce heat buildup. Inspect the bit tip for wear or damage before each use and replace if the pilot point is dulled or the shank is deformed.
Technical Specifications
- Bit Size: 3/32 inches
- Point Type: Split Point with Pilot Point Tip
- Pack Quantity: 2 bits per pack
- Package Quantity: 5
- Compatible Materials: Wood, Metal, Plastic
- Shank Type: No-Spin
- Weight: 0.31 pounds
Standard Information
- Brand: DEWALT ACCESSORIES
- Manufacturer Part Number: DW1906
