Description
Constructed of an aluminum center section and cast iron end plates, model GP-F10 is a high-pressure hydraulic gear pump with 8 displacement sizes from 0.07 – 0.48 in3/rev. (1.3 – 8.0 cm3/rev). The standard mounting flange is a SAE AA – 2 bolt; standard ports are SAE-8 inlet and SAE-6 outlet; and the drive shaft is a 1/2” diameter straight shaft with 1/8” key.
Recommended Working Conditions:
- FILTRATION: 25 micron or better
- OIL VISCOSITY: 7 – 700 cSt
- INLET PRESSURE: 12 – 32 psi absolute
- OIL TEMP: -25° – 80°C (-12° – 175°F)
- AMBIENT TEMP: -22° – 55°C (-8° – 130°F)
